รายการอุปกรณ์
R1,R4 - 2.2K 1/4W Resistor
R2,R3 - 4.7K 1/4W Resistor
R5 - 1K 1/4W Resistor
R6 - 1.5K 1/4W Resistor
R7 - 33K 1/4W Resistor
R8 - 10K 1/4W Resistor
C1,C2 - 0.1uF Ceramic Disc Capacitor
C3 - 470uF 25V Electrolytic Capcitor
D1 - 1N914 Diode
D2 - 1N4004 Diode
D3 - 12V 400mW Zener Diode
Q1,Q2,Q4 - BC547 NPN Transistor
Q3 - BD679 NPN Transistor
L1 - See Notes
Notes
1. L1 is a custom inductor wound with about 80 turns of 0.5mm magnet wire around a toroidal core with a 40mm outside diameter.
2. Different values of D3 can be used to get different output voltages from about 0.6V to around 30V. Note that at higher voltages the circuit might not perform as well and may not produce as much current. You may also need to use a larger C3 for higher voltages and/or higher currents.
3. You can use a larger value for C3 to provide better filtering.
4. The circuit will require about 2A from the 6V supply to provide the full 800mA at 12V.
No comments:
Post a Comment